The V200 is the Defend-O-Tron for sites that want more headroom: a faster x86 processor, four times the memory of the V100, a large SSD for logs and evidence, and a security chip. It runs the same firmware and web interface as the V100.
| Part | V200 |
|---|---|
| Processor | Intel N150, 4 cores (x86-64) |
| Memory | 16 GB DDR5-5600, on a replaceable SO-DIMM module |
| Storage | 32 GB eMMC, plus a 1 TB NVMe SSD |
| Network | Four 2.5 GbE ports (Intel I226-V) |
| Security chip | TPM 2.0 |
| Firmware | Dasharo (open-source coreboot with UEFI) |
| Display | HDMI or DisplayPort, for a monitor at the device |
| Power | 12 V DC, from the included 60 W adapter. Maximum draw 45 W (the maker’s figure). Power button |
The device keeps its metrics for 180 days (90 on the V100). See Device Status.
Three of the four Ethernet ports are used, labelled as on the V100:
| Port | Connect it to |
|---|---|
| ISP-IN | Your ISP equipment (modem or ONT) |
| ISP-OUT | Your router or firewall |
| MGMT0 | Your own network, to manage the device |
The fourth Ethernet port is not used. See Installation Guide for the cabling.
The V200 has no serial console. For local access, connect a monitor and a USB keyboard. To reinstall it, use a USB installer: see Recovery and Reinstall.
Connect the 12 V adapter, then press the power button. Connect the device to a UPS, and use Restart or Shut down in the web interface instead of unplugging it. See Power and UPS.
The V200’s hardware design is not open source, but its firmware is. Instead of a closed BIOS, it runs Dasharo, an open-source firmware distribution: coreboot with a UEFI interface. See Open Source Hardware.